Home > Products > Rotary Kiln Dryer


Bauxite Kiln

【Raw materials】: Bauxite
【Delivery】:15-30 days

【Application】:Bauxite rotary kiln is suitable for large-scale bauxite project.

Product Introduction


Taida energy savng bauxite kiln

1.Reliable working condition

2.Tempreture can reach 1600-1700 degree

3.ISO certificate energy saving bauxite Kiln appplication

Description: Our company has acquired the ISO certificate. As a kind of rotary cylinder equipment for burning various materials, rotary kiln is widely used to economic fields. Its working temperature can reach up to 1600 to 1700 degrees celsius. There are three kinds of kilns to produce bauxide, rotary kiln, shaft kiln and round kiln. Compared with other two kinds, bauxide kiln is calcined more evenly thanks to the continuous rotary movement of the kiln body. It is mainly used for refractory industry such as corundum brick, zicon slide gate block.
Structure: is mainly composed of rotary drum, support device, kiln head, kiln end, sealing arrangement and coal burner.
Working principle: Raw materials are fed in the drum from tremie pipe of higher end of the kiln. Owing to inclination and slow rotation, raw materials turn over constantly. They move form higher end to lower end. After discomposion and firing, raw materials are discharged out form the bottom of barrel and enter in to cooler. Fuels enter from kiln head and burn. The heat produced can heat raw materials which will become clinker. The hot air which is formed by the exchange with materials enters the kiln system again. Finally, the hot air is discharged into atomesphere.
Application: It can be used to dry limestone slag, coal powder and clay stone. It is mainly used for refractory industry such as corundum brick, zicon slide
ü Resonable structure, high efficiency, low energy consumption;
ü Higher production capacity, easy to operate;
ü Reliable working conditions;
ü Abrasion resistant and heat resistant;
ü Less pollution to environment;
ü Evenly cooling the rotary body and protect panel;
ü Stable air flow in the kiln;
ü Adopt double seal arrangemt;

Technical Parameter

Output(t/h) Rotation speed(r/min) Moto power(kw) Weight
ø1.4*33 0.9-1.3 0.39-3.96 18.5 47.5
ø1.6*36 1.2-1.9 0.26-2.63 22 52
ø1.8*45 1.9-2.4 0.16-1.62 30 78.2
ø1.9*39 1.65-3 0.29-2.93 30 77.59
ø2.0*40 2.5-4 0.23-2.26 37 119.1
ø2.2*45 3.4-5.4 0.21-2.44 45 128.3
ø2.4*40 6.2-6.8 0.39-2.44 55 136.5
ø2.5*40 9.0-10.5 0.44-2.44 55 149.61
ø2.5*50 6.25-7.4 0.62-1.86 55 187.37
ø2.5*54 6.9-8.5 0.48-1.45 55 196.29
ø2.7*42 10.0-11.0 0.10-1.52 55 198.5
ø2.8*44 12.5-13.5 0.437-2.18 55 201.58
ø3.0*45 12.8-14.5 0.5-2.47 75 210.94
ø3.0*48 25.6-29.3 0.6-3.48 100 237
ø3.0*60 12.3-14.1 0.3-2 100 310
ø3.2*50 40.5-42 0.6-3 125 278

Leave Message

We will contact you within 24 hours once receive your inquiry message.