Home > Products > Drying Equipment

<

Forestry Waste Dryer

Capacity

(t/h)

10-50

Power 

(Kw)

3-75

Rotation speed

(Rpm)

3-8

Inlet temperature

≤850

Gradient

(%)

3-5


Product Introduction

Forestry waste dryer machine can be used to dry the following material:

1.Sawdust, grazing, leaves, sugarcane biogases, and animals’ wastes and so on. And it can be used in Chemical Plant, Mine, metallurgy and other industries. For example, the ore, the scoria, coal, metallic powder, phosphor fertilizer, sulfur.

2.The granule materials which have special requesting and must dry in low temperature. For example, Vesicant; Light Calcium Carbonate; Active Dust; Magnet Powder; Plumbago and so on.

During the Drying Process, the best moisture content to pellet and briquette is about 13-15% and 11-12%, the function of the forestry waste dryer machine is to make the crushed pieces with suitable moisture.The sawdust rotary drum dryer is made up of Direct or Indirect Biomass Stove, Main Rotary Drum Body, Screw Conveyor, Cyclones, Air-locks, Fans and matched Pipes which can realize to reduce the moisture from 60% to 10%. 

Our after-sale service:

1. Warranty time: in 12 months except for spare parts and bearings.

2. Our professional service includes: free training guidance installation and debugging.

3. After selling we provide the warranty of one year.

4. If you have any problems we will help to solve on line or live in time.

5. Authorized oversea agents are also engaged in serving.

 

Working Principle of forestry waste dryer machine:

forestry waste dryer

1. Forestry waste dryer machine has wind adjusting equipment between stove and dryer, which can adjust wind blowing speed to dryer according to raw materials humidity and temperature when hot air going out from stove.

2. Forestry waste dryer machine is mainly for drying the small diameter raw material less than 30mm, The moisture content should be less than 65% for common dryers. You can dry the fresh grass directly, no need to cut into powder.

3. Forestry waste dryer machine are decided by the raw materials humidity, last humidity after dryer requirement, capacity per hour, and so on.

4. Forestry waste dryer machine has two types outlet materials way, one is outlet from rotary drum bottom, it is fit for large weight ratio materials, the other is to outlet from cyclone bottom, which fits for light ratio materials . So please tell us what kind of raw materials and dimension, then we will help you choose best dryer model.


Advantages

Good abrasive resistance and long service span
When the temperature is too high, there will no oxide skin. This machine is characterized by good abrasive resistance. Therefore, it has a long service span.

High output capacity
Whole system holds very high output capacity, small flow resistance; Whole system can be operated easily and conveniently. 

Flexible equipment configuration
Whole system can match with various heat source and auxiliary equipment, which makes whole drying system can meet different drying demands of different customers. 

Low energy consumption
After times' upgrading and improvement, energy consumption of Taida dryer is much less than common drying machine.


Technical Parameter

Item TDOSB-S TDOSB-S TDOSB-S TDOSB-S TDOSB-S TDOSB-S TDOSB-S TDOSB-S TDOSB-S TDOSB-S
Diameter (mm) 3500 3500 4000 4000 4500 4500 5000 5000 5600 5600
Length (mm) 22000 24000 24000 26000 24000 26000 26000 30000 28000 30000
Capacity (t/h) 13.5 15.8 19 22.5 25.8 28.125 34 39 45 50.6
Drying Type Single drum dryer
Note Proper models can be customized according to your demands. Please feel free to contact with us any time!  


Leave Message

We will contact you within 24 hours once receive your inquiry message.