Home > Products > Drying Equipment

<

Slag Dryer

Capacity

(t/d)

0.5-60

Power 

(Kw)

4-75

Rotation speed

(Rpm)

3-8

Inlet moisture

(%)

10-40

Delivery period

(day)

15-30


Product Introduction

   The slag dryer, also called the slag dryer machine, slag drying equipment or slag drying machine, is a rotary dryer made up of the rotary drum, induced air device, high speed scattering device, lifting plate, self-cleaning and transmission installation devices, receiving device, blast heater, reducer, and supporting and sealing installation devices etc. Taida slag dryer is commonly used to dry slag, carbide slag, limestone, clay, river sand, quartz sand and granulating slag in the industries of construction material, metallurgy, ore beneficiation, chemical engineering and cement production.

slag rotary drum dryer

  Slag Dryer Machine is widely used in building materials, metallurgy, mineral processing, chemical, cement and other industries, mainly for the slag, limestone, clay, sand, quartz sand, granulating slag and other wet materials with high intensity. After being dried by the slag drier, the dried slag can be used into the cement industry.


Advantages

1. Big processing capacity, strong anti-overload capacity, high heat efficiency and low coal consumption. The coal consumption is reduced by about 20%, thus directly decreasing the drying cost. The driving rack wheel and pinion adopts changeable pin cylinder rather than traditional cast steel gear, thus saving cost investment and greatly reducing the maintenance cost and time.
2. To reach the optimum drying effect, the steel slag dryer adopts downstream drying method, so that the materials and heat source go into the drying equipment from the same time of the cylinder, and the outlet temperature of the dryer is low and the heat efficiency is high.

3. It realizes innovation in internal structure as it strengthens the clearance and heat conduction of the scattered materials and eliminates the stickiness of the materials on the internal wall of the cylinder.
4. It uses new type of feeding and discharging device, thus completely eradicating feeding blockage, discontinuity, uneven and returning charge and reducing the load of the dust collection system.
5. It can satisfy the requirement for granularity and water content of the dried products of slag materials of different customers.

Technical Parameter

Item Gradient
(%)
Rotational speedr/min) Inlet air temperature(℃) Capacity (t/h) Power(kw)
MGT600 3-5 3-8 ≤850 Different Materials Different Capacity. 3
MGT800 3-5 3-8 ≤850 4
MGT1000 3-5 3-8 ≤850 5.5
MGT1200 3-5 3-8 ≤850 11
MGT1500 3-5 3-8 ≤850 15
MGT1800 3-5 3-8 ≤850 18.5
MGT2000 3-5 3-8 ≤850 22
MGT2200 3-5 3-8 ≤850 30
MGT2400 3-5 3-8 ≤850 37
MGT2600 3-5 3-8 ≤850 40
MGT2800 3-5 3-8 ≤850 55
MGT3000 3-5 3-8 ≤850 75
MGT3200 3-5 3-8 ≤850 90
MGT3400 3-5 3-8 ≤850 110
MGT3600 3-5 3-8 ≤850 150
MGT4000 3-5 3-8 ≤850 190
MGT4200 3-5 3-8 ≤850 200
MGT4500 3-5 3-8 ≤850 260


Leave Message

We will contact you within 24 hours once receive your inquiry message.