Home > Products > Drying Equipment

<

Drum Dryer

Capacity

(t/d)

0.5-40

Power 

(Kw)

4-75

Working mode

(h/d)

24

Inlet moisture

(%)

50-80

Delivery period

(day)

15-30


Product Introduction

Drum dryer is one of traditional dryer machines. This equipment has such advantages as reliable working condition, elastic operation, strong adaptability and high processing capacity, so that it is widely used in many fields such as metallurgy, building material, chemistry, coal washing, fertilizer, sand, ore, clay, kaolin and sugar. The diameter of drum drier is 1000-4000mm, and the length can be determined according to the specific drying requirement. The moist materials that go inside the cylinder of the dryer machine will be repeatedly lifted and scattered by the lifting board on the rotating wall, and in the falling process, the materials will be crushed by the scattering device into fine particles whose specific area is greatly increased, and the fine materials will sufficiently contact the hot air and will be dried.

rotary drum dryer

Drum dryer is mainly used in building materials industry or metallurgical industry , such as slag ,clay, coal powder, drying metal ore beneficiation leaching residue and other materials. In order to control the drying temperature, thermocouple is disposed on feeding and discharging device . It can display the temperature on feeding /end site by thermometer ,providing basis for controlling cylinder temperature (350-380 degrees).
Taida drying machine adopts the new type of feed device, has the function of guiding, flow, raising material etc, can make the material in the dryer section size to full uniform, make the curtain of material into thin, all state ,make the material full contact with hot air flow to achieve the full utilization of the heat energy . Reasonable selection parameters of drying machine, its coal consumption and electricity consumption is less 10-15% than generally drier at least , yield rises over 10-15%, has been widely used in cement and mineral processing enterprises.


Advantages

1. Widely used for drying material with humidity or granularity in the industries of mineral dressing, building material, metallurgy and chemical. It can be used for drying many kinds of materials such as limestone slag, coal powder, clay stone etc.
2. It has advantage of reasonable structure, high efficiency, low energy consumption.
3. It mainly consists of rotary body, raw material feeding plate, lifting blade, driving and supporting device, sealing ring and etc.


Technical Parameter

Item Gradient
(%)
Rotational speedr/min) Inlet air temperature(℃) Capacity (t/h) Power(kw)
MGT600 3-5 3-8 ≤850 Different Materials Different Capacity. 3
MGT800 3-5 3-8 ≤850 4
MGT1000 3-5 3-8 ≤850 5.5
MGT1200 3-5 3-8 ≤850 11
MGT1500 3-5 3-8 ≤850 15
MGT1800 3-5 3-8 ≤850 18.5
MGT2000 3-5 3-8 ≤850 22
MGT2200 3-5 3-8 ≤850 30
MGT2400 3-5 3-8 ≤850 37
MGT2600 3-5 3-8 ≤850 40
MGT2800 3-5 3-8 ≤850 55
MGT3000 3-5 3-8 ≤850 75
MGT3200 3-5 3-8 ≤850 90
MGT3400 3-5 3-8 ≤850 110
MGT3600 3-5 3-8 ≤850 150
MGT4000 3-5 3-8 ≤850 190
MGT4200 3-5 3-8 ≤850 200
MGT4500 3-5 3-8 ≤850 260


Leave Message

We will contact you within 24 hours once receive your inquiry message.